LLexfolio

How to Negotiate a Commercial Contract in India: Step by Step Preparation

Last updated: 12 November 2026

Short answer: good negotiation is mostly preparation. Decide what you need and what you can give up, learn what the law already gives you, list the issues in priority order, control the drafts, trade concessions deliberately, check who can sign, and then complete the stamping and execution properly. The ten steps below follow that order.

Negotiate with a clear method. The Lexfolio Contract Management and Negotiation for Managers is a self-paced certificate course on contract management and negotiation for managers. Price: Rs 499.

Step 1: Write down your goals and your walk-away point

Before the first call, write on one page: what the contract must achieve for the business, the three terms you cannot compromise on, the terms you would like but can trade, and the point at which you would walk away. Add the alternative if this deal fails. A manager who knows that a second supplier can deliver at a modest extra cost negotiates differently from one with no alternative. Share this page with the person who will approve the deal so that the team does not concede points the business needs.

Step 2: Learn the legal default before asking for anything

Some of what you plan to negotiate is already decided by law, and some of it cannot be changed by contract at all. A few examples:

  • Compensation for breach is governed by sections 73 and 74 of the Indian Contract Act, 1872. A liquidated damages clause will usually be read as allowing reasonable compensation not exceeding the amount named.
  • A restraint on practising a profession, trade or business after the relationship ends is void under section 27, subject to narrow exceptions, so spend your negotiating effort on confidentiality and non-solicitation rather than a wide non-compete.
  • If the other party is a micro or small enterprise, the Micro, Small and Medium Enterprises Development Act, 2006 requires payment within the agreed time, which cannot exceed 45 days from acceptance of goods or services, with compound interest at three times the bank rate for delay. A buyer who asks for 90 day payment terms from such a supplier is asking for something the statute does not allow.
  • The general limitation period for a suit on breach is three years under the Limitation Act, 1963, and a clause that cuts the period down is open to challenge under section 28 of the Contract Act.

Step 3: Map the risks in the deal

Ask what can go wrong and who bears it. For a supply contract the risks include late delivery, defective goods, price rise of inputs, change in law, supplier insolvency and data loss. For a services contract they include poor quality, key person leaving, delay, intellectual property ownership and confidentiality. For each risk, decide whether you want to prevent it (specification), shift it (indemnity, insurance), cap it (limit of liability) or accept it. This map becomes your issue list.

Step 4: Build a ranked issue list

PriorityMeaningTypical items
Must haveDeal fails without itScope and specification, price, payment terms, liability for core risks, IP ownership
Should haveStrong preference, tradeableTermination rights, service levels, audit rights, notice periods
Nice to haveGive away for something in returnReporting formats, minor timelines, renewal pricing formula

Send a short list of key points before the draft if the other side is willing. It saves rounds of drafting.

Step 5: Use a term sheet only when you need one

A term sheet or memorandum of understanding is useful for complex deals with several approvals. State plainly whether it is binding, and which parts are binding if only some are, such as confidentiality, exclusivity and costs. If you do not say, the other side may later claim the document was a binding agreement, or you may find the other side walking away from what you thought was a settled commercial point.

Step 6: Decide who holds the pen

The party that prepares the first draft usually sets the frame of the negotiation. If your side has a standard contract, use it. If the other side sends theirs, do not accept it as the starting point without a full read. Keep one master document and track all changes in it, with a version number and date. Avoid parallel versions held by different people.

Step 7: Redline with discipline

  1. Mark only the changes that matter, with a one line reason in the margin.
  2. Never accept a change silently. Say yes, no or yes with a modification.
  3. Keep a running issues table: clause, our position, their position, status.
  4. Do not reopen a closed point without telling the other side that you are doing so.
  5. Check defined terms, cross references and schedules after every round.

Step 8: Trade, do not just concede

Every concession should buy something. If the other side wants a higher liability cap, ask for a shorter payment cycle or a longer warranty in return. If you give a longer exclusivity period, ask for price protection. Package your trades so the other side sees a balanced outcome. Keep the tone constructive; most contracts are the beginning of a working relationship.

Step 9: Check authority and formalities before signing

Confirm that the person signing for each side is authorised. For a company, look for a board resolution or a delegation of authority and confirm the signing limit. Check names and registered addresses of the parties against incorporation records, and match them to the invoices and tax registrations that will be used in performance. Attach the schedules and annexures, initial each page where the contract requires it, and include the date and place.

Stamp duty is payable under the stamp law of the state where the instrument is executed or brought into use, so confirm the rate and the mode of payment, including e-stamping, with the competent authority in that state. An unstamped or insufficiently stamped contract is not void, but a court will not admit it in evidence until the duty and penalty are paid, as the Supreme Court’s seven judge bench held in 2023. For electronic signing, remember that section 10A of the Information Technology Act, 2000 recognises contracts formed by electronic means.

Step 10: Hand the contract over to the people who will perform it

A negotiated contract that stays in a legal folder is a wasted effort. Hold a short handover meeting with the business owner, finance and operations. Walk through the key dates, payment triggers, notice requirements, escalation steps and reporting duties. Enter the dates in the shared calendar and set up the obligation register. This is where negotiation ends and contract management begins.

A last check before you sign

  • Do the signed terms match what was agreed in the last call or e-mail?
  • Is every schedule, rate card and specification attached?
  • Are the notice addresses and contact persons current?
  • Are stamping and execution completed in the right place and date?
  • Does the business owner know the dates and duties?

Practise negotiation and contract management as one skill. The Lexfolio Contract Management and Negotiation for Managers is a self-paced certificate course on contract management and negotiation for managers. Price: Rs 499.

Frequently asked questions

Is a term sheet or MoU binding?

It depends on what the document says and what the parties intended. A document that states that it is non-binding except for confidentiality and exclusivity will generally be treated that way, while a document with definite, complete terms and no such statement may be argued to be binding. State your intention clearly.

Who has authority to sign a contract for a company?

A person authorised by the board or by the company’s own delegation of authority, within the limits set. Check the resolution or power of attorney. For significant contracts, ask the other side for a copy of the board resolution and the signatory’s specimen signature.

Can I sign a contract with an electronic signature?

Section 10A of the Information Technology Act, 2000 recognises contracts formed by electronic means, and the Act recognises electronic signatures. Some documents are excluded by the Act or need additional formalities, so check before using an e-signature for them.

What should I do if the other side refuses to negotiate?

Work out which three terms matter most and why, offer trades on lesser terms, ask what the other side’s real concern is, and decide your walk-away position before the meeting. If the contract is a standard form that cannot be changed, record your reservations and decide whether the risk is acceptable.

Do I need a lawyer for every contract?

Not for every purchase order, but a lawyer should review contracts that are long term, high value, involve intellectual property or data, or have one-sided liability or termination terms. A short review early costs far less than a dispute.

This article is general information, not legal advice for a specific case. Negotiating positions depend on your leverage, your industry and the exact facts, and stamp duty and some formalities vary by state. Have a lawyer review a contract of real value before you sign. Lexfolio is a learning resource.

Useful books for this topic

As an Amazon Associate, Lexfolio earns from qualifying purchases. Prices and availability are shown on Amazon.

Free CLAT PG 2027 sample: exam guide + 2 judgment passages

Get our 16 page CLAT PG starter free: the 2027 pattern, how to read judgment passages fast, the 25 key Supreme Court judgments of 2026, and two practice passages with 10 explained questions. Plus new free guides and law updates by email. Unsubscribe any time.

Learn this properly, with a certificate. Police and FIRs, consumer and bank fraud complaints, property, wills and inheritance, work rights, family law, cyber fraud and RTI, in plain English. Certificate Course in Everyday Law for Every Indian, ₹349: self-paced lessons, module quizzes and a final test; pass at 60% for a verifiable Lexfolio certificate.

See all Lexfolio certificate courses

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *